The image below shows an example of a TV's input selection.Ĭhange the computer screen output destination.The location of the Input button on your remote and the number and names of the inputs may be different on your TV.Make sure to check which input on the TV you are connecting to.Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Most TV remotes have an Input button that cycles from one input to the next.Press the Input button of the TV’s remote to change to the input that is connected to the computer.If you turn on the connected computer first while the TV’s power is off or standby, the computer screen may not be displayed correctly.At this point, the input has not been switched to the computer, therefore the picture from the connected computer is not displayed.Turn on the TV first, then turn on the computer.NOTE: Be sure to use an authorized High Speed HDMI cable bearing the HDMI logo. Connect the HDMI input port of the TV and HDMI output port of the computer via an HDMI cable.For details, refer to the instruction manual of your computer and video card. Depending on the specifications of the computer and video card, some resolutions supported by the TV are unable to be displayed.Some computers are not able to output an HDMI® or HD signal in certain video modes. Use a clone or duplicate output with 1080i if it is available on the computer.It is recommended that you take a note of the computer screen resolution before changing it (It is necessary when you restore the original setting).For information on how to check or change the computer screen resolution, refer to the help or instruction manual of the computer.Manuals are posted on your model support page. For resolutions supported by the TV, refer to the instruction manual of the TV.
Try following the procedure to output the screen again. NOTE: The issue may be resolved by turning the device off and on or disconnecting and reconnecting the cable, even when you follow the procedure shown below.
0 kommentar(er)
